What TMA, TME and FCR mean in customer service
By Bernardo Gontijo, founder of NeftPublished on Updated on 8 min read
Summary
TMA (tempo médio de atendimento, average handle time) measures how long each service interaction lasts on average. TME (tempo médio de espera, average wait time) measures how long the customer waits to talk to a person. FCR (first contact resolution) measures the share of requests resolved on the first contact. On the phone, Brazil's 2026 SAC Decree caps the wait at 20 seconds for 80% of requests, and an SQM Group survey of North American contact centers recorded an average FCR of 71% in 2022.
TMA, TME and FCR in one table
The three acronyms answer different questions about the same operation: how much time the team spends on each case, how long the customer waits before being served and how many cases end resolved without a new contact.
| Metric | What it measures | Basic formula |
|---|---|---|
| TMA (average handle time) | Average duration of the team's work on each interaction | Sum of handling times ÷ interactions handled |
| TME (average wait time) | Average time between joining the queue and the start of service by a person | Sum of waiting times ÷ interactions started |
| FCR (first contact resolution) | Share of requests resolved without a new contact for the same reason | Requests resolved on the first contact ÷ eligible requests × 100 |
In English, the same metrics appear as AHT (average handle time), ASA (average speed of answer) or average wait time, and FCR, which can mean first call resolution or first contact resolution. The second form is more useful when the customer uses more than one channel. In Brazil, AHT is usually called TMA and average wait time TME.
What TMA (average handle time) is
TMA is the average duration of each interaction, from the moment a team member takes the case until the end of the work tied to it. The most complete version adds talk time, the pauses in which the customer is kept waiting during the interaction and after-contact work, such as logging the case or opening a work order.
Illustrative example: three interactions of 6, 8 and 10 minutes, including logging, give a TMA of 8 minutes (24 ÷ 3). If logging is left out, the number drops, but the team's work stays the same.
This choice is not a detail. Even a single industry source varies: an SQM Group guide defines handle time as the interval between the agent answering and the call ending and, on the same page, cites an average that includes talk, hold and wrap-up. So before comparing two TMAs, check that they measure the same interval.
In video customer service, the interaction starts when the agent joins the room with the customer. The time the customer takes to allow camera and microphone before that is neither service nor waiting for the team; separating it helps find the right bottleneck.
There is no universal ideal TMA. A duplicate bill and a technical inspection by video have different natural durations. Compare the TMA of the same type of request over time, not the whole operation against a market average.
What TME (average wait time) is
TME is the average time the customer waits between joining the queue and starting to talk to a person. It measures the experience before service and depends mainly on the ratio between incoming demand and the number of agents available at each hour.
The average hides long waits. A queue where most people wait 10 seconds and a few wait 15 minutes can have an acceptable TME and many unhappy customers. Also track the share served within a time limit and the abandonment rate, which shows who gave up before being served and is therefore not counted in the waiting time.
Brazilian regulation uses exactly this format. On the phone, Decree No. 13,135/2026 sets the wait for an agent at up to 20 seconds for at least 80% of requests and up to 300 seconds for the rest, unless the sector regulator has a specific rule (art. 15). In electronic channels, anyone who chooses to talk to a person must be told the estimated waiting time (art. 13, § 2).
The decree applies to services regulated by the Brazilian federal Executive and to digital financial services supervised by the Central Bank. For its scope and other rules, see what changes with the new SAC Decree.
What FCR (first contact resolution) is
FCR is the percentage of requests resolved on the first contact, without the customer having to come back for the same reason. It is the metric closest to what the customer wants: having the problem solved, not just being served quickly.
There are two main ways to measure it, described by SQM Group:
- Customer survey: right after the interaction, the customer is asked whether the request was resolved, how many contacts it took and whether they used another channel. It counts as FCR when they answer yes, one contact and no other channel.
- Internal records: you check whether the same customer came back for the same reason within a window, which can range from 1 to 30 days depending on the type of request. SQM notes that this method tends to give results 10% to 20% higher than the survey.
As a reference, SQM Group recorded an average FCR of 71% in 2022, measured by post-call survey in North American phone contact centers, with at least 400 surveys per center. The company considers an FCR between 70% and 79% good. These are data from another market and a single channel: use them as an order of magnitude, not as a target.
The distinction between channels matters. If the customer starts in chat and ends on the phone, the chat did not resolve the request, even if each channel logs a closed interaction. In Brazil, the same principle appears in the SAC Decree, which forbids requiring the consumer to restart the service or make new contacts for the same request (art. 7).
Why track the three metrics together
Each metric on its own encourages a shortcut. A TMA-only target pushes the team to close quickly, transfer or ask the customer to come back later. A TME-only target can lead to staffing above demand. FCR balances the two, because a short interaction that causes a repeat contact costs more than a complete one.
SQM Group data from 2022 show lower FCR on longer calls: 73% on calls of 1 to 3 minutes and 62% on calls over 15 minutes. The study suggests an association, not a cause: long calls tend to be the hard cases, and shortening them does not make them easier. SQM itself recommends assessing the effect on FCR and satisfaction whenever TMA goes up or down.
| Combined signal | Likely reading | What to check |
|---|---|---|
| TMA falls and FCR falls | Interactions closed before resolution | Transfers, repeat contacts and callback requests |
| TME rises and abandonment rises | Lack of capacity at some hours | Peaks by hour and weekday and team scheduling |
| TMA rises and FCR rises | Cases resolved more completely | Whether the gain holds for the most frequent request types |
| Low TME and low FCR | Fast service that does not resolve | Training, system access and team autonomy |
How to calculate without distorting the numbers
- Write down what goes into TMA: talk, pauses with the customer waiting and after-contact work. Keep the same rule in every report.
- Separate waiting from service and from the customer's technical setup, such as allowing camera and microphone in the browser.
- Show the abandonment rate next to TME, because those who gave up are not in the waiting average.
- Besides the average, use the share served within a limit, such as 80% within 20 seconds.
- Segment by request type, channel and hour before comparing periods or teams.
- Define the FCR repeat-contact window by request type and only compare cases that have completed that window.
- Avoid an individual TMA-only target; also assess agents by resolution and customer ratings.
To turn these metrics into a return-on-investment study, with cost per resolution and scenarios, use the guide Video customer service ROI: metrics and KPIs. This glossary stays with the definitions.
How to track TMA and TME in Neft video customer service
Neft's reports and dashboard show average handle time, average queue waiting time, completed and abandoned interactions and ratings received, including per agent. The period can be filtered and reports can be exported as PDF, Excel or CSV.
In the service queue, the customer sees their position and the estimated waiting time, information the SAC Decree requires when the consumer chooses to talk to a person. The reports page does not list FCR as a ready-made indicator: to calculate it, combine the exported records with your repeat-contact rule or with a post-service survey.
When the operation uses AI for triage, metrics must separate what the AI resolved from what reached the team. See how this works in AI customer service.
Frequently asked questions
- What is the difference between TMA and TME?
- TMA measures how long each interaction lasts after the team takes the case. TME measures how long the customer waits before being served. One describes the team's work; the other, the customer's experience in the queue. They are calculated separately and should not be added together without saying so.
- What is a good TMA in customer service?
- There is no single value. TMA depends on the type of request: a simple inquiry takes less time than a technical inspection by video. Compare the TMA of the same request type over time and read it together with FCR, because a low TMA with many repeat contacts indicates interactions closed before resolution.
- How do you calculate FCR?
- Divide the number of requests resolved on the first contact by the total eligible requests and multiply by 100. Resolution can be confirmed by a customer survey or by the absence of a new contact for the same reason within a defined window, such as seven or thirty days.
- Is there a legal limit on SAC waiting time in Brazil?
- For suppliers covered by Decree No. 13,135/2026, yes: on the phone, the wait for an agent is up to 20 seconds for at least 80% of requests and up to 300 seconds for the rest, unless the regulator sets a specific rule. In electronic channels, the consumer must be told the estimated waiting time.
- What is FCR in customer service?
- FCR stands for first contact resolution. It is the percentage of requests resolved without the customer having to come back for the same reason, in any channel. It also appears as first call resolution when the measurement covers only the phone.
Sources
Videos, studies and documents used in this article. Article researched and written with AI assistance. Decree checked on the Planalto website, SQM Group pages and Neft public pages verified on November 20, 2026. Unsourced numerical examples are illustrative and the combined readings are editorial.
Legislation
Decree No. 13,135 of October 9, 2026 (opens in a new tab)Office of the President of Brazil · published on
Continuity of the request without new contacts (art. 7), estimated waiting time in electronic channels (art. 13, § 2) and phone wait of up to 20 seconds for 80% of requests and up to 300 seconds for the rest (art. 15). Published in the Official Gazette (DOU) on 10/13/2026.
Reference page
What is a Good First Call Resolution Rate? Call Center Industry 2022 FCR Benchmark Results (opens in a new tab)SQM Group · accessed on
Page dated 05/11/2022. Average FCR of 71% in 2022, by post-call survey, in North American phone contact centers with at least 400 surveys each; range considered good of 70% to 79%. Vendor data.
Reference page
How To Calculate Your First Call Resolution Rate (opens in a new tab)SQM Group · accessed on
Page dated 01/19/2021. Survey-based and internal-records methods, a repeat-contact window of 1 to 30 days and internal results 10% to 20% higher than survey results.
Reference page
What Are the Industry Standards for the 7 Essential Customer Service Metrics (opens in a new tab)Mike Desmarais, SQM Group · accessed on
Page dated 12/07/2022. Definition of handle time and FCR by call length (73% at 1–3 minutes, 62% above 15 minutes). Observed association, not causation.
Reference page
Neft reports and dashboard (opens in a new tab)Neft · accessed on
Published indicators: average handle time, average queue waiting time, completed and abandoned interactions, ratings and export as PDF, Excel or CSV.
Read more
Want to serve your customers by video?
Take the free assessment or try Neft for 15 days, with no credit card.

